Engineering Drying Systems Since 1999
Industrial Drying Systems for Thai PlantsThailand Applications
THAILAND APPLICATIONS & INDUSTRIES

Precision drying for Thai process industries.

From rice, cassava, sugarcane, coconut, tropical fruit, seafood, rubber and food ingredients to specialty chemicals, biomass, wastewater sludge and recycling, GEM Drytech develops industrial drying systems around each Thai plant’s material, moisture load, utilities and production requirements.

Get a dryer recommendation for your Thai plant

Share your material, inlet moisture, target moisture and production rate. Our process engineering team will review the application and recommend a practical drying approach.

+66 ▼
Thailand +66
Japan +81
China +86
Taiwan +886
Singapore +65
Vietnam +84
Indonesia +62
Thailand +66
Philippines +63
India +91
Australia +61
USA +1
Canada +1
Germany +49
UAE +971

By submitting this form, you agree to our Privacy Policy.

By submitting this form, our engineering team may contact you to understand your requirements and gather additional technical information.

Thank you — request received.

One of our drying engineers will review your material and process requirement and respond with the recommended next step. Prefer to talk now? Message us on WhatsApp →

Drying engineered for quality, efficiency and reliable plant integration.

Thai processors operate quality-driven plants where moisture affects product specification, storage stability, hygiene, energy use, yield and handling. Drying systems must integrate with existing equipment, operating conditions and process controls.


GEM Drytech develops the drying basis around material characteristics, moisture load, thermal sensitivity, throughput, available utilities, automation, dust or solvent risk, hygiene, exhaust management and site requirements relevant to Thailand.

1999
Engineering Since 1999
25+
Years of Drying Expertise
100+
Material Applications Evaluated
Global
International Project Experience

Materials Thai plants need to dry, stabilize or recover.

Explore priority product, by-product and industrial applications in Thailand. Final dryer selection depends on material behaviour, moisture load, capacity, heat sensitivity, utilities, hygiene and site-specific safety requirements.

01

Food & Ingredient Processing

Product: Rice Ingredients, Cassava Starch, Coconut Ingredients, Tropical Fruit Ingredients, Protein Ingredients, Functional Food Ingredients

→
02

Seafood & Fish Processing

Product: Fishmeal, Marine Protein Ingredients, Dried Fish, Seafood Ingredients, Shrimp By-Products, Aquaculture Ingredients

→
03

Coconut Fibre Powders, Palm Kernel Ingredients, Agricultural Biomass, Seaweed Ingredients, Hydrocolloid Feedstock

Product: Palm Fibre Powders, Palm Kernel Ingredients, Agro-Biomass Ingredients, Marine Functional Ingredients, Hydrocolloid Feedstock

→
04

Grain, Rice & Cereal Processing

Product: Rice, Paddy, Rice Flour, Corn, Wheat, Cassava Starch, Grain-Based Food Ingredients

→
05

Fermented Food, Beverage & Brewing

Product: Fermented Ingredients, Yeast Products, Malt Ingredients, Beverage Powders, Fermentation-Derived Ingredients

→
06

Vegetable, Tropical Fruit & Agricultural Processing

Product: Dried Mango, Pineapple, Banana, Durian, Chilli, Garlic, Ginger, Vegetable Powders

→
07

Animal Feed, Pet Food & Aquafeed

Product: Feed Pellets, Pet Food, Aquafeed, Fish Feed, Protein Meal, Functional Feed Ingredients

→
08

Pharmaceutical & Biotechnology

Product: APIs, Pharmaceutical Intermediates, Excipients, Granules, Biotech Ingredients, Fermentation-Derived Ingredients

→
09

Nutraceutical, Herbal & Functional Ingredients

Product: Nutraceutical Powders, Herbal Ingredients, Botanical Extracts, Functional Powders, Plant Extract Ingredients

→
10

Specialty Chemical & Fine Chemical

Product: Specialty Chemicals, Fine Chemicals, Salts, Crystals, Intermediates, Specialty Powders, Inorganic Chemicals

→
11

Pigments, Coatings & Advanced Polymers

Product: Pigments, Colorants, Coating Powders, Polymer Additives, Specialty Resins, Functional Powders

→
12

Semiconductor & Electronic Materials

Product: High-Purity Powders, Electronic Chemicals, Ceramic Electronic Materials, Process Precursors, Specialty Functional Powders

→
13

Battery & Energy Materials

Product: Cathode Materials, Anode Materials, Graphite, Carbon Materials, Battery Precursors, Specialty Mineral Powders

→
14

Pulp, Paper & Cellulose

Product: Cellulose Fibre, Pulp Fibre, Specialty Cellulose, Paper Fibre Products, Biomass Fibre

→
15

Biomass, Wood & Bioenergy

Product: Wood Chips, Wood Pellets, Biomass Fuel, Briquette Feedstock, Dried Wood Fibre, Bioenergy Feedstock

→
16

Industrial & Municipal Sludge

Product: Dried Sludge Granules, Dried Biosolids, Recovered Solids, Alternative Fuel Feedstock

→
17

Recycling & Circular Materials

Product: RDF, SRF, Recovered Fibre, Recycled Fuel Feedstock, Recovered Organic Solids, Recovered Mineral Feedstock

→
18

Minerals, Ceramics & Construction Materials

Product: Silica, Limestone, Gypsum, Ceramic Feedstock, Mineral Powders, Clay Materials, Construction Mineral Ingredients

→

Control moisture where quality and process efficiency matter.

For Thai processors, final moisture affects stability, purity, colour, flowability, storage, packaging, energy use and downstream performance. Each dryer is configured around the required process outcome.

  • Food Ingredients
  • Seafood & Marine
  • Coconut & Agro-Biomass
  • Rice / Grain / Cereals
  • Feed / Pet Food / Aquafeed
  • Pharma & Biotech
  • Herbal / Nutraceutical
  • Fine Chemicals
  • Cassava & Sugar Processing
  • Battery Materials
  • Biomass / Recovered Materials
  • Minerals & Ceramics

Turn wet process streams into stable, usable material.

Drying can reduce storage and transport burden, improve handling and support recovery of wet Thai food, seafood, cassava, sugarcane, coconut, rubber, chemical, sludge and recycling streams.

  • Fish Residues
  • Coconut & Cassava Residues
  • Rice Bran & Grain Fines
  • Brewer's Spent Grain
  • Vegetable Pulp
  • Feed Fines
  • API Filter Cake
  • Chemical / Pigment Cake
  • Semiconductor Process Solids
  • Battery Precursor Cake
  • Sludge / Biosolids
  • Mineral / Recycling Residues

Drying systems for Thai process industries.

Focused on Thai industries where moisture affects product quality, throughput, storage, energy use, emissions, handling or recovery of wet process streams.

01

Food & Ingredient Processing

Product: Rice Ingredients, Cassava Starch, Coconut Ingredients, Tropical Fruit Ingredients, Protein Ingredients, Functional Food Ingredients
By-Product: Food Solids, Vegetable Pulp, Fruit Pomace, Peel, Press Cake, Off-Spec Product

02

Seafood & Fish Processing

Product: Fishmeal, Marine Protein Ingredients, Dried Fish, Seafood Ingredients, Shrimp By-Products, Aquaculture Ingredients
By-Product: Fish Heads, Frames, Skin, Scales, Viscera, Trimmings, Shellfish Residues

03

Coconut Fibre Powders, Palm Kernel Ingredients, Agricultural Biomass, Seaweed Ingredients, Hydrocolloid Feedstock

Product: Palm Fibre Powders, Palm Kernel Ingredients, Agro-Biomass Ingredients, Marine Functional Ingredients, Hydrocolloid Feedstock
By-Product: Coconut Husk, Palm Fibre Residues, Sugarcane Bagasse, Cassava Pulp, Marine Fibre, Wash Solids

04

Grain, Rice & Cereal Processing

Product: Rice, Paddy, Rice Flour, Corn, Wheat, Cassava Starch, Grain-Based Food Ingredients
By-Product: Rice Bran, Grain Fines, Husk, Milling Residues, Broken Grain, Cereal Dust

05

Fermented Food, Beverage & Brewing

Product: Fermented Ingredients, Yeast Products, Malt Ingredients, Beverage Powders, Fermentation-Derived Ingredients
By-Product: Brewer's Spent Grain, Yeast Solids, Fermentation Solids, Press Cake, Wet Grain Residues

06

Vegetable, Tropical Fruit & Agricultural Processing

Product: Dried Mango, Pineapple, Banana, Durian, Chilli, Garlic, Ginger, Vegetable Powders
By-Product: Vegetable Pulp, Peel, Trimmings, Press Cake, Agricultural Residues, Off-Spec Vegetables

07

Animal Feed, Pet Food & Aquafeed

Product: Feed Pellets, Pet Food, Aquafeed, Fish Feed, Protein Meal, Functional Feed Ingredients
By-Product: Feed Fines, Wet Feed Mash, Protein Residues, Pellet Rejects, Fish Residues, Fibre-Rich Feed Residues

08

Pharmaceutical & Biotechnology

Product: APIs, Pharmaceutical Intermediates, Excipients, Granules, Biotech Ingredients, Fermentation-Derived Ingredients
By-Product: API Filter Cake, Fermentation Biomass, Wet Granules, Biological Residues, Process Cake

09

Nutraceutical, Herbal & Functional Ingredients

Product: Nutraceutical Powders, Herbal Ingredients, Botanical Extracts, Functional Powders, Plant Extract Ingredients
By-Product: Herbal Press Cake, Extraction Residues, Botanical Fibre, Plant Residues, Wet Granules

10

Specialty Chemical & Fine Chemical

Product: Specialty Chemicals, Fine Chemicals, Salts, Crystals, Intermediates, Specialty Powders, Inorganic Chemicals
By-Product: Chemical Filter Cake, Salt Cake, Wet Crystals, Reaction Residue, Process Sludge, Wet Chemical Solids

11

Pigments, Coatings & Advanced Polymers

Product: Pigments, Colorants, Coating Powders, Polymer Additives, Specialty Resins, Functional Powders
By-Product: Pigment Filter Cake, Colorant Sludge, Polymer Fines, Wet Additive Cake, Coating Residues, Process Solids

12

Semiconductor & Electronic Materials

Product: High-Purity Powders, Electronic Chemicals, Ceramic Electronic Materials, Process Precursors, Specialty Functional Powders
By-Product: High-Purity Filter Cake, Fine Powder Residues, Process Cake, Electronic Chemical Residues, Wash Solids

13

Battery & Energy Materials

Product: Cathode Materials, Anode Materials, Graphite, Carbon Materials, Battery Precursors, Specialty Mineral Powders
By-Product: Graphite Filter Cake, Carbon Fines, Precursor Cake, Process Residues, Specialty Powder Fines

14

Pulp, Paper & Cellulose

Product: Cellulose Fibre, Pulp Fibre, Specialty Cellulose, Paper Fibre Products, Biomass Fibre
By-Product: Paper Mill Sludge, Pulp Fibre Residue, Deinking Residues, Reject Fibre, Cellulose Fines

15

Biomass, Wood & Bioenergy

Product: Wood Chips, Wood Pellets, Biomass Fuel, Briquette Feedstock, Dried Wood Fibre, Bioenergy Feedstock
By-Product: Sawdust, Bark, Wood Shavings, Forest Residues, Biomass Fines, Agricultural Residues

16

Industrial & Municipal Sludge

Product: Dried Sludge Granules, Dried Biosolids, Recovered Solids, Alternative Fuel Feedstock
By-Product: Industrial Sludge, Sewage Sludge, ETP Sludge, Dewatered Sludge Cake, Biosolids

17

Recycling & Circular Materials

Product: RDF, SRF, Recovered Fibre, Recycled Fuel Feedstock, Recovered Organic Solids, Recovered Mineral Feedstock
By-Product: Wet Recovered Fibre, Organic Fraction, Sorting Residues, Wash Sludge, RDF/SRF Fractions

18

Minerals, Ceramics & Construction Materials

Product: Silica, Limestone, Gypsum, Ceramic Feedstock, Mineral Powders, Clay Materials, Construction Mineral Ingredients
By-Product: Mineral Filter Cake, Wash Sludge, Silica Sludge, Ceramic Slurry Solids, Stone Fines, Mineral Fines

Selected customer drying project references.

Long-term project relationships, successful commissioning, performance validation and customer support across Vietnam, Canada and the USA.

USA | NUTRATIVA🇺🇸2023–PRESENT

Northern Lights Food Processing, LLC

Project summary:
Completed dryer installation work, commissioning support, and operator training for Northern Lights Food Processing in the USA.

2023Client appreciated the professionalism, expertise, teamwork, and trustworthy support provided during the dryer commissioning and installation process.
"Both objectives were achieved to our satisfaction. Your team showed professionalism, expertise, and trustworthy support throughout the project."
CANADA | BASIC GRAIN🇨🇦2026–PRESENT

Basic Grain Products (Canada) Inc.

Project summary:
Supplied a Conventional Air Dryer for rice cake drying operations. The equipment was approved and cleared for production use after successful operational checks and performance verification.

2026Formal approval received with appreciation for installation, commissioning, performance verification, and technical support.
"We confirm acceptance and clearance of the conventional air dryer for production use."
VIETNAM | VN🇻🇳2018–PRESENT

Ben Tre Investment Coconut Joint Stock Company – BEINCO

GEM Drytech installed and commissioned a Two-Stage Band Dryer for coconut product drying at BEINCO's processing facility in Ben Tre, Vietnam.

2018Successful installation & commissioning · Contract output achieved
"The installation and commissioning of the two-stage band dryer have been successfully completed, and the production output satisfied the contract terms."

Where moisture becomes a quality, capacity or compliance problem.

Across food, seafood, rice, cassava, sugar, rubber, coconut, chemicals, biomass, sludge and recycling processes, excess or inconsistent moisture can affect specifications, throughput, storage, energy consumption and safe operation.

Seafood / Marine

High-moisture marine materials can deteriorate quickly if not stabilized.

Fish and seafood by-products need careful moisture reduction with attention to hygiene, odour, fat content and material sensitivity.

Drying objective: stabilize moisture around the intended food, feed, ingredient or recovery route.
Food / Grain

Final moisture must be repeatable without compromising texture or product quality.

Rice, cassava, fruit and vegetable products can be sensitive to overheating, colour changes, flavour loss, hygiene and residence time.

Drying objective: achieve stable final moisture with controlled temperature, airflow and residence time.
Pharma / Biotech

Sensitive materials need narrow thermal and moisture control.

APIs, intermediates and biological materials may require controlled temperature, containment and validated final moisture.

Drying objective: define the drying basis around sensitivity, containment, residence time and final specification.
Semiconductor / Electronics

Trace moisture and contamination can affect high-value material performance.

Electronic chemicals, high-purity powders and process precursors may require clean handling, controlled atmosphere and tight moisture specifications.

Drying objective: control moisture and contamination around the downstream process specification.
Battery Materials

Moisture can affect precursor handling and downstream electrochemical performance.

Cathode, anode, graphite and precursor materials can require low residual moisture, clean material handling and repeatable drying conditions.

Drying objective: establish a controlled drying basis around product chemistry and final moisture specification.
Chemical / Solvent

Residual moisture or solvent can cause caking, instability or off-spec product.

Chemical cakes, salts and crystals may also introduce corrosion, solvent-vapour, dust or explosion-risk considerations.

Drying objective: match the dryer to material behaviour, construction materials and hazard profile.
Dryer Fire Safety

Thailand factory and workplace safety requirements depend on plant and equipment configuration.

Review the Factory Act B.E. 2535 (1992), as amended, and applicable Department of Industrial Works (DIW) requirements with the Thai plant operator. Assess guarding, hot surfaces, ventilation, burner and gas systems, combustible dust and explosion hazards, electrical protection and safe operating procedures.

Drying objective: review site-specific fire, machinery, ventilation and workplace risks before installation.
Thailand Regulatory Planning

Local approvals depend on the complete equipment package and installation.

Where applicable, consider DIW factory rules, Thai FDA food GMP under Ministry of Public Health Notification No. 420 B.E. 2563 (2020), relevant electrical and fuel-gas provisions, local fire safety, industrial emissions and waste management obligations.

Drying objective: determine the applicable approval path with the Thai plant owner and local specialists during engineering.

Prove the drying basis before committing to the machine.

01

Dried & Tested pilot validation

Representative material can be trialed to establish drying behaviour, target moisture, residence time and a practical scale-up basis before final equipment selection.

02

Material-first dryer selection

Band, paddle, rotary, fluid-bed, tray and other dryer types are considered according to the material rather than forcing every application into one machine.

03

Energy-conscious process design

Airflow, heat input, recirculation and residence time are engineered around the evaporation load and available plant utilities.

04

Continuous industrial throughput

Systems can be configured for continuous production where batch drying creates labour, consistency or capacity limitations.

05

Integration with the Thai plant process

Feeding, conveying, drying, cooling, controls, hygiene, dust management, exhaust treatment and downstream interfaces can be evaluated as one process.

06

Thailand compliance planning

Check applicable Thai DIW and factory safety requirements, machinery and electrical protection, combustible dust and fuel-gas risks, Thai FDA GMP for food plants, and emissions or waste obligations with the customer and local specialists.

From moisture problem to a validated drying basis.

Before fixing equipment dimensions and commercial scope, confirm the evaporation load, material behaviour, utilities, product targets and applicable Thai factory, food hygiene, machinery safety and environmental requirements.

01 / APPLICATION DATA

Define the Thai plant requirement

Material, wet feed rate, inlet moisture, target moisture, operating hours, temperature limits, heating utilities, Thai plant location and downstream requirements.

02 / DRIED & TESTED

Pilot Trial

Where appropriate, test representative material to validate drying behaviour and practical operating conditions before scale-up.

03 / PROCESS + COMPLIANCE

System Design

Develop evaporation load, residence time, airflow, heat source, conveying, controls, risk assessment, exhaust treatment, technical documentation and applicable factory or machinery approvals for the Thai installation.

04 / PROJECT EXECUTION

Supply & Commissioning Support

Coordinate manufacturing, technical documentation, Thai-language operating information where required, installation supervision, commissioning and interfaces with local authorities, inspectors and site contractors.

Industrial dryer questions Thai plants ask before they buy.

These process, engineering, safety, environmental, operating and procurement questions help specify an industrial dryer for a Thai plant.

Which Thai industries can GEM Drytech support?
Applications include rice and paddy, cassava pulp and starch, sugarcane bagasse, coconut products, tropical fruit, seafood, rubber, feed, food ingredients, chemicals, biomass, municipal or industrial sludge and recycling streams.
Can GEM Drytech test material before we invest?
Yes. The Dried & Tested pilot programme helps evaluate representative wet material, residence time, product quality, achievable final moisture and practical scale-up conditions before final equipment selection.
Can the dryer meet our target moisture and throughput?
Dryer selection and design consider feed rate, inlet and target moisture, temperature sensitivity, physical characteristics, available utilities, hygiene needs, dust hazards and downstream handling. Performance is application-specific and should be validated.
Does every industrial dryer require a special factory or machinery license in Thailand?
No single approval automatically applies to every industrial dryer. The Thai Factory Act and DIW requirements depend on the factory category, installed equipment, location and activity. The plant owner and local engineers should confirm permits and inspections for the actual package.
What occupational and factory safety rules apply in Thailand?
Review the Factory Act B.E. 2535 (1992), as amended, applicable DIW regulations and occupational safety requirements. Assess machinery guarding, hot surfaces, fire protection, ventilation, dust, ignition sources, access and emergency procedures with local specialists.
What if the package contains a boiler, steam vessel or pressurized system?
Steam, pressure or fuel systems can trigger additional Thai engineering, installation, inspection and operating requirements. The plant owner should confirm the applicable rules and qualified inspection routes before procurement.
How should combustible dust, solvent vapours or fuel-gas hazards be managed?
Carry out a material-specific fire and explosion risk assessment. Check dust explosibility, ignition sources, ventilation, static control, suitable equipment, detection, isolation and explosion protection where warranted.
Does every complete dryer require Thai electrical product certification?
Not automatically. Applicable electrical installation requirements and any regulated electrical products must be checked by equipment type, site and responsible Thai authority. An entire custom dryer does not necessarily have one universal certification.
What if the control system includes wireless communications equipment?
Wireless or telecommunications modules may be subject to NBTC requirements depending on their type. Standard wired industrial controls should not automatically be classified as regulated radio equipment.
What about natural gas, LPG or gas-fired heating systems?
Confirm fuel supply, burner protection, ventilation, emergency shutdown, fire safety, electrical classification and the relevant Thai installation requirements with the fuel supplier and qualified local contractors.
How do Thai FDA GMP and food hygiene affect a food dryer?
Thai food manufacturing may be subject to the Food Act B.E. 2522 (1979) and Thai FDA GMP requirements, including Ministry of Public Health Notification No. 420 B.E. 2563 (2020), as applicable. Hygienic product-contact design, cleaning access and contamination controls should align with the site quality system.
What environmental requirements apply to exhaust, wastewater or sludge?
The plant owner should review applicable DIW factory emissions, pollution-control and waste management rules, local permit conditions and industrial estate requirements. Exhaust treatment and sludge handling must be assessed for the specific process.
Does every imported industrial dryer require a Thai Industrial Standards Institute (TISI) mark?
No universal TISI mark automatically applies to every custom industrial dryer. Mandatory standards, regulated components or product certifications, if any, depend on the actual equipment classification and applicable Thai requirements.
Is a single Thailand compliance certificate sufficient for a full dryer system?
Not necessarily. The dryer, pressure or fuel equipment, electrical components, factory permits, food contact area and exhaust system can fall under different requirements. Confirm the compliance plan with the local project team.
When should the Thai authorities or independent inspectors be consulted?
Consult the relevant DIW or local authority, qualified engineer, industrial-estate operator or inspection body early when factory licensing, regulated equipment, emissions or specific safety approvals may be involved.
Can GEM Drytech provide documentation for Thai installations?
GEM Drytech can discuss English and Thai operating information, equipment drawings, process data, component documentation and technical files needed for customer-led approval and commissioning.
What data do we need for an engineering recommendation?
Send the material name and condition, wet feed rate (kg/h), inlet and target moisture (wet basis), bulk density, particle size, available heating utility, operating hours, location and any safety, hygiene or environmental constraints. Representative samples are valuable for the Dried & Tested trial.
HAVE A MATERIAL TO DRY IN THAILAND?

Let's work out the right system.

Tell us your material, initial and final moisture, throughput, temperature limits, available heat source and Thailand plant location. Our engineering team will assess the appropriate drying concept.

Start with your application.

Share your process details and production requirement.

Request a Discussion →

Tell us what
you need to dry.

Provide the material, moisture levels, production rate, utilities and Thai plant location so our team can assess the drying duty and interfaces.

Talk to an Engineer